MAVIC Crossride 27.5 Inch Intl MTB Wheels

The legendary Crossride, now with a wider and lighter rim

An afternoon out on the trails can be as good as a holiday, but only if your kit can stand up to the stresses and strains of being ridden hard across all types of terrain.

New sleeved rim for 2016
Based on our proven Mavic construction, Crossride gets a completely new, sleeved rim for 2016 that's wider and lighter to bring better comfort and control. We’ve also spent time fine-tuning the hubs to reach a much better level of reliability. Power transfer is handled by our TS-2 freehub system, inspired by our higher-end products.

Precise and aggressive
Straight-pull and bladed spokes ensure a high level of stiffness to offer better, more precise handling. And they also give the wheels a distinctive, aggressive look.

Fully practical
On the practical side, hubs are compatible with 9mm and 15mm axles on the front and 10mm and 12mm on the rear (9 x100 QR and 12x135QR not are delivered with the wheels). Crossride is available in 26", 27.5" and 29" without tyres.

RIM PROFILE
Crossride 16

VERSIONS - FRONT
6 bolts 15x100mm

VERSIONS - REAR
6 bolts 12x142mm

Diameter: 29"
Front Axle: 15x100mm
Rear Axle: 12x142mm
UST: no
Tyre size: 2.2 / 2.3
Tyre size: 2.3 / 2.4
Diameter : 650b/27.5"
wheels /discipline:VTT
Range level: Good
Use: All-mountain / Enduro
Category : Trail
Rim width (internal): 21mm

INTENDED USE

Recommended weight limit : 120kg

RIMS
Drilling: traditional
Valve hole diameter: 8,5 mm with pop off reducer
Joint: sleeved
ETRTO size 27.5": 584x21C
Material: S6000 Aluminum
Disc brake specific profile
Internal width: 21 mm
Tyre: tubetype

SPOKES
Count: 24 front and rear
Lacing: front and rear crossed 2
Nipples: brass, ABS
Shape: straight pull, bladed
Material: steel

HUBS
Freewheel: TS-2 alloy
Sram XD Compatible (XX1-X01)
Sealed cartridge bearings
Axle material: aluminum
Front and rear bodies: aluminum